The Official Shocker Owners Group


You are not connected. Please login or register

Tremor leaks through the manifold

View previous topic View next topic Go down  Message [Page 1 of 1]

1 Tremor leaks through the manifold on Tue Mar 06, 2012 7:50 pm

So I'm trying to fix my friend's tremor. I took my manifold off which is good and put it on his tremor and it still leaks, it leaks out the side of the manifold. I put the manifold back onto my gun and it seals and everything is fine.

What could be the problem?

View user profile

2 Re: Tremor leaks through the manifold on Wed Mar 07, 2012 11:00 am

you were using the same manifold orings? If that's not it, maybe check the solenoid inserts.


_________________
View user profile

3 Re: Tremor leaks through the manifold on Wed Mar 07, 2012 4:36 pm

Its either the noid spool or the noid inserts are out of alignment. Ide say the noid spool

View user profile

4 Re: Tremor leaks through the manifold on Wed Mar 07, 2012 10:51 pm

i used my noid and manifold and it still leaks on the tremor.

View user profile

5 Re: Tremor leaks through the manifold on Wed Mar 07, 2012 11:42 pm

it could actually be a bolt systes problem too, try swapping bolt systems. try each individually then all together. the noid, manifold and bolt system, not each piece of the bolt guide

View user profile

6 Re: Tremor leaks through the manifold on Thu Mar 08, 2012 12:01 am

The bolt seals in my shocker fine.

and mine in the tremor.

btw didn't know that nxt solenoid inserts are different then sft Sad fucked mine up putting it in the tremor Sad now i have zero guns working.

View user profile

7 Re: Tremor leaks through the manifold on Thu Mar 08, 2012 3:34 pm

ive got some sft ones lol

View user profile

8 Re: Tremor leaks through the manifold on Fri Mar 09, 2012 9:06 pm

i need the left insert and an HE can!

hook me up. Oh do you also have an autococker detent? red or silver?

View user profile

9 Re: Tremor leaks through the manifold on Fri Mar 09, 2012 10:44 pm

Admin

avatar
Admin
the only thing i have is the insert

View user profile http://shocker-owners.forumotion.com

10 Re: Tremor leaks through the manifold on Sat Mar 10, 2012 9:39 pm

So i found out it was the reg at 400psi and the orings can't handle that type of presure and it looks like the noid is done.

View user profile

Sponsored content


View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum